7/3.5mm HDPE MICRO DUCT

–Micro duct is manufactured with 100% virgin HDPE
–Outer diameter:7.0mm ± 0.1mm
– Inner diameter:3.5.0mm ± 0.1mm
–Wall thickness: 1.75mm ± 0.10mm
–Pressurization：5 minutes @16 bar each duct
–Kink: ≤70mm (IEC 60794-1-2 Method E10)
–Tensile strength:≥520N (Rate of extension:100mm/min)
–Min. bend radius: 84mm
–Co-efficient of Friction:≤0.1(750mmOD,450°loop,5kg mass)
–Color and printing：As per customer specification

Description:

Microducts are small diameter conduits ranging from 5-22 mm OD that provide a pathway for fiber cables. They are suitable for use in network applications such as FTTH (Fibre to the Home), FttB (Fibre to the Building), FttC (Fibre to the Curb) or the last mile.

Features:

Outer Diameter 5 to 22 mm, Versions DI and DB
Supplied as single tubes or bundle configurations
Made from High-Density Polyethylene (HDPE)
Silicone inner lining to reduce friction on cable blowing
Excellent stress crack and stress crush resistance

More Size:

Model (mm)	OD (mm)	ID (mm)	Wall thickness (mm)	Tensile strength (N)	Min. bend radius (mm)
5/3.5	5	3.5	0.75±0.10	≥180	60
7/3.5	7	3.5	1.75±0.10	≥520	84
7/4	7	4	1.50±0.10	≥500	84
7/5	7	5	1.00±0.10	≥340	84
8/5	8	5	1.50±0.10	≥550	96
8/6	8	6	1.00±0.10	≥385	100
8.5/6	8	6	1.00±0.10	≥500	100
10/6	10	6	2.00±0.10	≥900	120
10/8	10	8	1.00±0.10	≥520	120
10/8.5	10	8.5	0.75±0.10	≥380	120
12/8	12	8	2.00±0.10	≥1200	144
12/10	12	10	1.00±0.10	≥620	144
12.7/10	12.7	10	1.35±0.10	≥1450	120
14/10	14	10	2.00±0.10	≥1350	168
14/12	14	12	1.00±0.10	≥740	168
16/10	16	10	3.00±0.10
16/13	16	13	1.50±0.10
18/14	18	14	2.00±0.10	≥1850	288
20/16	20	16	2.00±0.10	≥2050	320
25/20	25	20	2.50±0.10	≥3200	300
Remark:
–Raw Material: 100% virgin HDPE
–Color and printing: as per customer specification
–Storage temperature: -40°C～+70°C
–Installation temperature: -30°C～+50°C
–Operating temperature: -40°C～+70°C
–Internal Co-efficient of Friction: ≤ 0.1